Effect of microstructure on stress–strain and pore-pressure response of sabarmati sand under the influence of mica     

P. Seethalakshmi 《Geomechanics and Geoengineering》2020,15(2):123-139

ABSTRACT

Micaceous soil is believed to be detrimental for civil engineering constructions due to the effect of high compressibility, low compacted density and low shear strength. Individual mica particle has numerous intact mica flakes foliated over each other making it flexible upon loading and rebound upon unloading due to its low hardness and resilient nature. Hence, micaceous soils with mica content more than 10% are considered undesirable for highway pavements, embankments and railway track constructions. When platy mica particles are sufficiently numerous to interact with spherical sand particles, bridging and ordering phenomena are augmented within the soil mass creating unique sand-mica particle orientation (MS microstructure) unlike sand-sand particle orientation (PS microstructure). The current experimental research was conducted to evaluate the variation in stress–strain, pore pressure and effective stress path response of Sabarmati sand under the influence of mica (sand with 30% mica and pure sand) with MS and PS microstructure respectively. Effect of particle crushing on stress–strain and pore pressure response was also studied on Sabarmati sand with MS and PS microstructure. Distinctive macroscopic response was observed in Sabarmati sand with MS microstructure under the influence of mica as well as mica particle crushing.  相似文献   

A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull     

《Applied Ocean Research》2019

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.  相似文献   

盾构辅助常压开仓技术在南宁地铁隧道中的应用          下载免费PDF全文

曲兆雷 《探矿工程》2020,47(2):88-93

盾构开仓是盾构隧道施工中难以避免的一道工序，结合南宁地铁四号线总部基地站-飞龙路站区间隧道的盾构开仓实践经验，介绍了素桩加降水这一辅助常压开仓技术在南宁地铁隧道中成功应用的实例。在介绍工程应用背景的基础上，详细叙述了辅助开仓方法中素桩及降水施工的技术要点，可为南宁地区盾构开仓方案选择提供指导，也可为类似条件下盾构开仓方案的选择提供借鉴。  相似文献   

大气负荷对新疆地区地壳形变和地面重力变化的影响     

王海涛  王斌  王伟  章传银 《大地测量与地球动力学》2019,39(2):189-194

基于ECMWF全球大气模型和中国地面气候资料日值数据集中新疆及周边的气象站气压数据，根据弹性地壳形变理论，采用移去-恢复法，利用负荷格林函数法和球谐函数法，计算新疆及周边区域2011~2015年大气负荷变化对地壳垂直、水平形变的影响，同时采用大气导纳方法计算大气变化对地面重力的影响。结果表明，大气负荷对新疆地区垂直形变的影响达到cm级，对地面重力的影响可达10 μGal；大气负荷影响具有明显的季节性。  相似文献   

Grain‐scale pressure variations and chemical equilibrium in high‐grade metamorphic rocks     

L. Tajčmanová  Y. Podladchikov  R. Powell  E. Moulas  J.C. Vrijmoed  J.A.D. Connolly 《Journal of Metamorphic Geology》2014,32(2):195-207

In the classical view of metamorphic microstructures, fast viscous relaxation (and so constant pressure) is assumed, with diffusion being the limiting factor in equilibration. This contribution is focused on the only other possible scenario – fast diffusion and slow viscous relaxation – and brings an alternative interpretation of microstructures typical of high‐grade metamorphic rocks. In contrast to the pressure vessel mechanical model applied to pressure variation associated with coesite inclusions in various host minerals, a multi‐anvil mechanical model is proposed in which strong single crystals and weak grain boundaries can maintain pressure variation at geological time‐scales in a polycrystalline material. In such a mechanical context, exsolution lamellae in feldspar are used to show that feldspar can sustain large differential stresses (>10 kbar) at geological time‐scales. Furthermore, it is argued that the existence of grain‐scale pressure gradients combined with diffusional equilibrium may explain chemical zoning preserved in reaction rims. Assuming zero net flux across the microstructure, an equilibrium thermodynamic method is introduced for inferring pressure variation corresponding to the chemical zoning. This new barometric method is applied to plagioclase rims around kyanite in felsic granulite (Bohemian Massif, Czech Republic), yielding a grain‐scale pressure variation of 8 kbar. In this approach, kinetic factors are not invoked to account for mineral composition zoning preserved in rocks metamorphosed at high grade.  相似文献   

不同荷载条件下冻土融化沉降过程试验研究   总被引：2，自引：1，他引：1  

黄永庭  马巍  何鹏飞  栗晓林 《冰川冻土》2021,43(1):184-194

融沉是困扰多年冻土区工程建设与安全运营的关键因素之一。通过室内试验,针对两种初始干密度不同的青藏粉质黏土,在-8~24 ℃之间正弦波动的周期温度边界条件下,分别开展了无荷载、静荷载及动荷载作用下冻结饱和试样的融沉试验（试样的初始温度为-1 ℃）,研究了试样内部温度、变形、孔隙水压力的时间变化过程。结果表明：温度边界相同时,在不同荷载作用下试样内部温度响应过程差异显著,反映了荷载对冻土融化速率的影响。在无荷载作用下,试样的竖向变形呈线性发展趋势,每次冻融过程中的融沉变形变化不大。在静荷载和动荷载作用下,试样的竖向变形呈先快速增加后逐渐稳定的趋势,且融化沉降变形主要发生在前3~4个冻融循环过程。试验结束时,在静、动荷载作用下试样最终变形量大于无荷载作用下,且干密度较小时竖向变形较大。在动荷载作用下,试样内部孔隙水压力变化幅度大于静荷载,且在前3次冻融循环过程中,动荷载作用下试样内部孔隙水压力消散数值大于静荷载,之后随着冻融循环次数的增加两者差异逐渐减小。试样融沉变形过程与温度变化、孔隙水压力的积累和消散过程密切相关。试验结果可为复杂边界条件下融化固结理论研究和工程中地基土体的融沉变形预测提供依据。  相似文献   

全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献   

煤矿井下碎软煤层瓦斯抽采钻孔钻进工艺          下载免费PDF全文

郝世俊  殷新胜  方俊 《探矿工程》2021,48(S1):173-180

碎软煤层在我国煤矿区分布广泛,具有瓦斯含量高、压力大、渗透率低等特征,在碎软煤层中钻进存在喷孔、塌孔、排渣不畅等问题,导致碎软煤层钻进困难、孔内事故频发,进而影响成孔深度和成孔率,造成瓦斯治理盲区;尤其是随着我国煤矿开采深度的增加,碎软煤层瓦斯抽采孔工作量和成孔难度不断增大。针对碎软煤层瓦斯抽采对钻孔施工需求,研究开发了高转速螺旋钻进工艺、中风压空气钻进工艺、气体定向钻进工艺等实用、经济的碎软煤层高效钻进技术,破解了碎软煤层钻孔排渣护孔、轨迹控制和高效成孔等方面难题,实现了碎软煤层钻孔在服役周期内的长效利用,相关技术在安徽、贵州、山西等地区成功推广应用,达到高效、精准抽采的目的,为矿井安全生产提供了技术保障。  相似文献   

粗砂砾石地层中高压旋喷桩隔水帷幕施工技术          下载免费PDF全文

张红涛 《探矿工程》2021,48(6):113-117

太原万达广场A2区商住楼基坑工程部分区域为粗砂砾石地层,基坑隔水帷幕中深层搅拌桩无法有效使用。提出了在粗砂砾石地层采用高压旋喷桩隔水帷幕的施工技术方案,采用双套管锚杆钻机引孔、单管高压喷射工艺进行施工,成功实施了这一工程。经检查,喷射注浆体相互咬合良好,有效桩径内水泥含量均匀无夹块现象,隔水帷幕止水效果良好。  相似文献   

花岗岩风化料弃土快速堆填过程中不排水抗剪强度评估     

詹良通  孙倩倩  郭晓刚  陈锐  陈云敏 《岩土力学》2021,(1):50-58

沿海沿江城市地下开挖产生的工程渣土含泥量大、含水率高且较松散,主要运往渣土场进行堆填处置。由于产量巨大而处置场地有限,许多渣土场在运营过程中存在堆填速度快、缺乏排水设施、超高超库容堆填等问题,容易引发堆填体失稳事故。目前对于非饱和工程渣土堆体在快速堆填过程中的失稳机制认识尚不清晰,尤其是对这一过程中的高饱和度工程渣土强度增长规律缺乏足够的认识。以深圳红坳渣土场填料——花岗岩风化料(CDG)填土为研究对象,对不同初始饱和度土样进行三轴不排水不排气等向压缩和剪切试验,结果表明:非饱和CDG填土不排水抗剪强度随围压增大呈非线性增长,增长速率与试样初始饱和度密切相关;当土样压缩后的饱和度超过0.7,不排水强度随围压的增长速率显著降低。基于有效固结应力法的原理,结合Hilf孔压公式和修正剑桥模型,提出了一种工程渣土不排水抗剪强度估算方法,并通过与试验结果对比验证了该方法对初始饱和度高于0.6的CDG填土的适用性。利用该方法确定的不排水强度cu与正应力σn的关系可应用于高饱和度工程渣土快速堆填中的稳定性分析。  相似文献